Here's a complete starting point for your webpage that honors mentors in diagnostic imaging. It includes:

• A user-friendly form for mentees to submit their names, mentors, and locations.

• A live counter that tracks how many people have submitted.

• A display list of submissions.

• A simple chatbot UI placeholder (can be enhanced with actual AI/logic later).

• A disclaimer section.

Next steps you might consider:

• Persisting submissions (via localStorage, backend/database).

• Enhancing the chatbot with a real assistant using a service like Dialogflow or OpenAI's API.

• Styling refinements or animations.

Would you like help integrating any of these features?

✅ I've added a search bar that allows users to filter the mentee-mentor list by typing in a name or location. It's real-time and user-friendly.

Would you like the list to be sortable as well (e.g., by mentor name or location)? Or should we make the entries persist using local storage or a backend?

Great question!

✅ What “persist” means in this context:

Right now, when someone submits a mentee-mentor entry on the webpage, it:

• Shows up on the screen ✅

• Increases the counter ✅

• Gets added to a list on the page ✅

BUT — if the user refreshes the page or leaves and comes back:

🚫 All entries disappear
🚫 The counter resets
🚫 Nothing is saved anywhere

🔐 Persistence = Saving Data Somewhere

To persist the data means to store it so it’s not lost, even after closing the browser. There are two main ways to do this:

1. Local Persistence (Local Storage)

• Stores data in the user's browser only

• Works without a backend server

• Still lost if the user clears browser data or uses a different device

🔧 Pros: Easy to implement
🚫 Cons: Not shared across users or devices

2. Backend Persistence (Database/Server)

• Stores data on a server using a database

• Allows all users to see everyone's submissions

• Keeps the data permanently (unless deleted)

🔧 Pros: Data is secure, centralized, and accessible to all users
🚫 Cons: Requires backend setup (e.g., Node.js, Python Flask, or Firebase)

📌 Example Use Case:

Since this is a public tribute webpage, backend persistence would allow:

• Everyone to view the full growing list of mentees/mentors

• No data loss on page reload

• Real-time updating and filtering

Would you like me to:

• Show how to add local storage?

• Or guide you on setting up a backend for full persistence (e.g., Firebase or simple Express server)?

Great! Let's walk through setting up a backend with full persistence for your mentee-mentor tribute webpage.

We'll use a Node.js + Express + MongoDB stack for this. It's beginner-friendly and scalable.

🛠️ Overview

Frontend (you already have): HTML + Tailwind
Backend: Node.js + Express.js
Database: MongoDB (using MongoDB Atlas for cloud storage)

✅ Step-by-Step Backend Setup

1. Install Required Tools

Install Node.js if you don’t have it:

bash
Copy code
node -v
npm -v

If not installed, download from: https://nodejs.org/

2. Create Your Backend Project

bash
Copy code
mkdir mentor-tribute-backend
cd mentor-tribute-backend
npm init -y
npm install express mongoose cors

This installs:

• express: for server and API routes

• mongoose: for interacting with MongoDB

• cors: to allow your frontend to connect

3. Create server.js

js
Copy code
// server.js
const express = require('express');
const mongoose = require('mongoose');
const cors = require('cors');

const app = express();
app.use(cors());
app.use(express.json());

mongoose.connect('YOUR_MONGODB_CONNECTION_STRING', {
  useNewUrlParser: true,
  useUnifiedTopology: true
}).then(() => console.log('Connected to MongoDB'))
  .catch(err => console.error('MongoDB connection error:', err));

// Schema
const TributeSchema = new mongoose.Schema({
  mentee: String,
  mentor: String,
  location: String,
  date: { type: Date, default: Date.now }
});

const Tribute = mongoose.model('Tribute', TributeSchema);

// Routes
app.get('/tributes', async (req, res) => {
  const tributes = await Tribute.find().sort({ date: -1 });
  res.json(tributes);
});

app.post('/tributes', async (req, res) => {
  const tribute = new Tribute(req.body);
  await tribute.save();
  res.json(tribute);
});

// Start server
const PORT = 4000;
app.listen(PORT, () => console.log(`Server running on port ${PORT}`));

4. Get MongoDB Connection String

1. Go to MongoDB Atlas

2. Create a free cluster

3. Create a database and collection

4. Get your connection string and replace "YOUR_MONGODB_CONNECTION_STRING" in server.js

Example format:

pgsql
Copy code
mongodb+srv://<username>:<password>@cluster.mongodb.net/mentors?retryWrites=true&w=majority

5. Run the Server

bash
Copy code
node server.js

You should see: Server running on port 4000 and Connected to MongoDB

🔄 Connect Frontend to Backend

In your HTML/JS file:

• Replace form submission code to send a POST request

• Fetch tributes with GET

Would you like me to update the frontend code next to work with this backend?

Perfect! You're off to a great start.

Let's break this down like you're starting a school project — step by step, no tech jargon overload.

🧱 Step-by-Step: Create a Backend Project (8th Grade Friendly)

Think of this like making a "robot helper" (the backend) that listens and remembers what people say (stores data).

✅ Step 1: Create a New Folder for Your Project

Open a terminal or command prompt and run this:

bash
Copy code
mkdir mentor-tribute-backend
cd mentor-tribute-backend

📁 You just made a new folder called mentor-tribute-backend and moved into it.

✅ Step 2: Start a New Node.js Project

Inside that folder, run:

bash
Copy code
npm init -y

📦 This command makes a file called package.json that keeps track of the tools your project needs.

✅ Step 3: Add the Tools You'll Use

Still in the terminal, run:

bash
Copy code
npm install express mongoose cors

This installs:

• express – helps your robot listen to website messages.

• mongoose – helps it talk to the database (where the info is stored).

• cors – makes it okay for your webpage to talk to this robot (security helper).

✅ Step 4: Create the Robot Brain (server.js)

In your folder, create a file called server.js.

To do this:

• You can open the folder in VS Code (recommended).

• Or run in terminal:

bash
Copy code
touch server.js   # For Mac/Linux

or

bash
Copy code
echo. > server.js   # For Windows

Then open it and paste this code:

js
Copy code
const express = require('express');
const mongoose = require('mongoose');
const cors = require('cors');

const app = express();
app.use(cors());
app.use(express.json());

// Connect to database (we’ll update this part soon)
mongoose.connect('YOUR_MONGODB_CONNECTION_STRING', {
  useNewUrlParser: true,
  useUnifiedTopology: true
}).then(() => console.log('✅ Connected to MongoDB'))
  .catch(err => console.error('❌ MongoDB connection error:', err));

// Define what a “tribute” looks like
const TributeSchema = new mongoose.Schema({
  mentee: String,
  mentor: String,
  location: String,
  date: { type: Date, default: Date.now }
});

const Tribute = mongoose.model('Tribute', TributeSchema);

// Routes - how your robot responds
app.get('/tributes', async (req, res) => {
  const tributes = await Tribute.find().sort({ date: -1 });
  res.json(tributes);
});

app.post('/tributes', async (req, res) => {
  const tribute = new Tribute(req.body);
  await tribute.save();
  res.json(tribute);
});

// Start the server
const PORT = 4000;
app.listen(PORT, () => console.log(`🚀 Server running on port ${PORT}`));

✅ Step 5: Run the Server

In your terminal, make sure you're still in the mentor-tribute-backend folder.

Run:

bash
Copy code
node server.js

If everything works, you'll see:

pgsql
Copy code
🚀 Server running on port 4000
❌ or ✅ MongoDB connection message

❓ What's Next?

Right now, your robot is set up and listening — but it needs the database connection string (YOUR_MONGODB_CONNECTION_STRING) to actually remember things.

Would you like help setting up the MongoDB database in the cloud (MongoDB Atlas)? It's free and perfect for this project.

Yes, exactly!

Here’s how you open a terminal depending on your operating system:

💻 If You’re on Windows

✅ Yes, type cmd

1. Press the Windows key on your keyboard

2. Type cmd

3. Press Enter

4. You’ll see a black window — this is the Command Prompt (terminal)

🟡 Alternative (better for developers):
If you installed Node.js, you may also have PowerShell or Windows Terminal — those work too.

💻 If You’re on Mac

1. Press Cmd + Space to open Spotlight

2. Type Terminal

3. Hit Enter

💻 If You’re on Linux

• Press Ctrl + Alt + T
  or

• Search for “Terminal” in your menu

Once you're in the terminal, you can follow the steps I gave earlier:

bash
Copy code
mkdir mentor-tribute-backend
cd mentor-tribute-backend
npm init -y
npm install express mongoose cors

Let me know what system you're on (Windows/Mac/Linux), and I’ll tailor the instructions if needed. Want help creating the MongoDB connection next?

Great question! Here's how to paste and run npm init -y in your folder, depending on how you're using your computer:

🪟 If You're on Windows Using cmd

🧭 Step-by-Step:

1. Open Command Prompt (cmd)

   • Press Windows + R

   • Type cmd

   • Press Enter

2. Navigate to Your Folder
   If your folder is on the Desktop, do this:

   bash
   Copy code
   cd Desktop
   mkdir mentor-tribute-backend
   cd mentor-tribute-backend
   

3. Paste the Command
   In the terminal, you can right-click to paste.
   Paste this:

   bash
   Copy code
   npm init -y
   

4. Run It
   Just hit Enter after pasting.
   This creates a file called package.json — it’s like the folder’s ID card.

🍎 If You're on Mac

🧭 Step-by-Step:

1. Open Terminal

   • Press Cmd + Space and type Terminal

   • Press Enter

2. Navigate to Your Folder
   Example:

   bash
   Copy code
   cd Desktop
   mkdir mentor-tribute-backend
   cd mentor-tribute-backend
   

3. Paste and Run the Command
   Use Cmd + V to paste:

   bash
   Copy code
   npm init -y
   

   Then hit Enter

📝 What Happens After You Run npm init -y

You’ll see something like:

swift
Copy code
Wrote to /Users/YourName/Desktop/mentor-tribute-backend/package.json

That means it worked! ✅

Would you like to do the next step: installing the backend tools (express, mongoose, cors)?

Ah yes — this is a Windows PowerShell security feature that blocks running scripts like npm.ps1.

You're close — no worries! You have 2 options to fix this:

✅ Option 1: Use Command Prompt Instead (Easiest)

You’re currently using PowerShell — let's switch to Command Prompt where this problem won't happen.

Here's how:

1. Close PowerShell.

2. Press Windows Key + R

3. Type: cmd

4. Press Enter — this opens the Command Prompt (black window)

5. Type this:

bash
Copy code
cd Desktop
cd mentor-tribute-backend
npm init -y

✅ This should work with no error!

🛠️ Option 2: Change PowerShell's Execution Policy (Advanced)

If you really want to stay in PowerShell, run this as Administrator:

powershell
Copy code
Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy RemoteSigned

Then confirm by typing Y and pressing Enter.

Then your npm commands will work in PowerShell too.

🚀 Recommendation

For now, just use Command Prompt (cmd). It’s faster and works out of the box with npm.

Would you like help running the npm install express mongoose cors step next?

Yes — that’s exactly what you should see. ✅🎉

Let’s break it down:

✅ What This Means:

• added 87 packages: You successfully installed the tools.

• npm install express mongoose cors worked correctly!

• found 0 vulnerabilities: No security problems — all good!

• npm fund: Optional — ignore this for now.

📦 What You Now Have Installed:

You just added three important tools to your project:

✅ You’re Ready for the Next Step:

Now we’ll:

1. Create a file named server.js

2. Add the server code that handles submissions from your webpage

Would you like me to walk you through how to create server.js and what to put in it?

Awesome — let’s build your server.js step by step.

📁 Step 1: Create the server.js File

You can do this in two ways:

✏️ Option 1: Use VS Code (Recommended)

1. Open VS Code

2. Click File > Open Folder

3. Choose your folder: mentor-tribute-backend

4. Click the New File icon (top left) and name it:

   pgsql
   Copy code
   server.js
   

🔲 Option 2: Use Command Prompt

In the same terminal you're using (C:\Users\chazm\mentor-tribute-backend>), type:

bash
Copy code
echo. > server.js

That creates an empty file called server.js in your folder.

✍️ Step 2: Add This Code to server.js

Now open server.js in VS Code or Notepad and paste this:

js
Copy code
const express = require('express');
const mongoose = require('mongoose');
const cors = require('cors');

const app = express();
app.use(cors());
app.use(express.json());

// 🔌 Connect to MongoDB (you'll replace this with your real string soon)
mongoose.connect('YOUR_MONGODB_CONNECTION_STRING', {
  useNewUrlParser: true,
  useUnifiedTopology: true
}).then(() => console.log('✅ Connected to MongoDB'))
  .catch(err => console.error('❌ MongoDB connection error:', err));

// 📄 Define what a “tribute” looks like
const TributeSchema = new mongoose.Schema({
  mentee: String,
  mentor: String,
  location: String,
  date: { type: Date, default: Date.now }
});

const Tribute = mongoose.model('Tribute', TributeSchema);

// 📥 Get all tributes
app.get('/tributes', async (req, res) => {
  const tributes = await Tribute.find().sort({ date: -1 });
  res.json(tributes);
});

// 📤 Add a new tribute
app.post('/tributes', async (req, res) => {
  const tribute = new Tribute(req.body);
  await tribute.save();
  res.json(tribute);
});

// 🚀 Start the server
const PORT = 4000;
app.listen(PORT, () => console.log(`🚀 Server running on port ${PORT}`));

🟨 Step 3: Wait! One Thing Left – MongoDB

See the line:

js
Copy code
mongoose.connect('YOUR_MONGODB_CONNECTION_STRING', ...

You’ll need to replace 'YOUR_MONGODB_CONNECTION_STRING' with your real MongoDB database URL.

Would you like help creating a free MongoDB database using MongoDB Atlas? It only takes a few minutes and is necessary to store the tributes.

Perfect — let’s set up a free MongoDB database on MongoDB Atlas so your webpage can store tribute submissions permanently.

🛠️ Step-by-Step: Set Up MongoDB Atlas (Free Tier)

✅ 1. Go to MongoDB Atlas

👉 Visit: https://www.mongodb.com/cloud/atlas/register

• Sign up for a free account

• Use Google sign-in or create an account with email

✅ 2. Create a Free Cluster

After signing in:

1. Click "Create a New Project"

   • Name it something like: MentorTribute

   • Click Next > Create Project

2. Click “Build a Database”

3. Choose:

   • Shared → free tier

   • Cloud provider: any (e.g., AWS)

   • Region: pick one close to you (e.g., US East)

4. Click Create Cluster

This takes 1–2 minutes. Let it finish spinning.

✅ 3. Create a Database & Collection

After the cluster is ready:

1. Go to "Database" > "Browse Collections"

2. Click “Add My Own Data”

   • Database name: mentorDB

   • Collection name: tributes

   • Click Create

Now your collection (like a table) is ready!

✅ 4. Create a Database User

1. Go to "Database Access" on the left menu

2. Click Add New Database User

3. Choose:

   • Username: mentoruser

   • Password: mentorpass123 (or make your own and remember it)

   • Click Add User

✅ 5. Allow Your IP to Access It

1. Go to "Network Access"

2. Click Add IP Address

3. Choose:

   • Allow Access From Anywhere → Click Confirm

✅ 6. Get Your Connection String

1. Go to "Database" > "Connect"

2. Click:

   • Connect your application

3. Copy the connection string:

   ruby
   Copy code
   mongodb+srv://mentoruser:<password>@cluster0.mongodb.net/?retryWrites=true&w=majority
   

Replace <password> with the real password (e.g., mentorpass123)
Add mentorDB as the default database name:

Final example:

bash
Copy code
mongodb+srv://mentoruser:mentorpass123@cluster0.mongodb.net/mentorDB?retryWrites=true&w=majority

✅ 7. Paste It in Your server.js

Replace this line in your code:

js
Copy code
mongoose.connect('YOUR_MONGODB_CONNECTION_STRING', {

with:

js
Copy code
mongoose.connect('mongodb+srv://mentoruser:mentorpass123@cluster0.mongodb.net/mentorDB?retryWrites=true&w=majority', {

🟢 Final Step: Run Your Server

In your terminal:

bash
Copy code
node server.js

You should see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Now your backend is officially storing data in MongoDB! 🎉

Would you like help connecting your frontend (HTML) to this backend now?

Good question — MongoDB Atlas gives you several connection options, but for our backend server (server.js), you want to choose:

👉 Drivers (the first option — “Connect your application”).

Because:

• You’re writing a Node.js app (server.js)

• Drivers = connection code for apps

• Compass, Shell, VS Code are for humans exploring or editing data directly, not for your webpage backend

✅ Steps:

1. Click Drivers

2. Pick Node.js as the driver

   • Version: use the latest (e.g., Node.js 4.0+)

3. Copy the connection string they give you. It’ll look like:

bash
Copy code
mongodb+srv://<username>:<password>@cluster0.abcd123.mongodb.net/?retryWrites=true&w=majority

4. Update it:

   • Replace <username> with the user you created (mentoruser)

   • Replace <password> with your password (mentorpass123 or whatever you set)

   • Add your database name (mentorDB) after .net/

👉 Final example:

bash
Copy code
mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority

🔌 Next Step

Paste that into your server.js where it says:

js
Copy code
mongoose.connect('YOUR_MONGODB_CONNECTION_STRING', {

Then run:

bash
Copy code
node server.js

Do you want me to show you exactly where in server.js to paste this string so you don’t miss anything?

Got it! You're probably using VS Code, and it's asking for help working with .json files.

To work with JSON files smoothly, you just need to install a JSON extension in VS Code — but good news: VS Code already has built-in support for JSON, so you likely don’t need anything extra unless you're doing something advanced.

✅ Option 1: Basic JSON Support (Already Built In)

You can:

• Open any .json file (like package.json)

• VS Code will highlight it and auto-format it

✅ No extra install needed for this!

✅ Option 2: (Optional) Install a JSON Extension

If you want extra tools (like formatting, previewing JSON trees, etc.), here's what to do:

1. Open VS Code

2. Go to the Extensions Panel (click the square icon on the left sidebar or press Ctrl+Shift+X)

3. In the search box, type:

   nginx
   Copy code
   json tools
   

4. Recommended extensions:

   • ✅ JSON Tools (by Erik Lynd) – lets you prettify, minify, sort

   • ✅ Prettier – helps auto-format all code including JSON

5. Click Install on the one you like

📁 Example: Opening & Editing package.json

1. In VS Code’s File Explorer, find your project folder (mentor-tribute-backend)

2. Click on package.json

3. You can edit it — no extension needed for basic use

Would you like help editing or adding something to your package.json file?

Ah, I see what’s happening 👍

The problem is with this part of your code:

js
Copy code
mongoose.connect((mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority
 {
, {
  useNewUrlParser: true,
  useUnifiedTopology: true
})

❌ Issues:

1. You accidentally left mongodb+srv://... unquoted.
   It should be a string inside quotes "...".

2. You also have an extra { in there.

✅ Corrected Code:

Here’s how it should look:

js
Copy code
mongoose.connect("mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority", {
  useNewUrlParser: true,
  useUnifiedTopology: true
})
.then(() => console.log('✅ Connected to MongoDB'))
.catch(err => console.error('❌ MongoDB connection error:', err));

🛠 What to Do:

1. Open server.js

2. Replace your current mongoose.connect(...) block with the fixed one above.

3. Save the file

4. Run your server again:

bash
Copy code
node server.js

🔍 What You Should See If It Works:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

⚠️ Note: Replace
mentoruser:mentorpass123@cluster0.abcd123.mongodb.net
with your actual cluster info (Atlas gave you a connection string with your cluster name — it won’t be abcd123, that was just my placeholder).

Do you want me to walk you through exactly where to copy the connection string from MongoDB Atlas so you paste the right one?

Absolutely — here's your fully corrected server.js file that connects to MongoDB, listens for new tribute submissions, and returns saved data.

✅ Replace everything in your server.js file with this:

js
Copy code
const express = require('express');
const mongoose = require('mongoose');
const cors = require('cors');

const app = express();
app.use(cors());
app.use(express.json());

// ✅ Replace this string with your actual connection string from MongoDB Atlas
const mongoURI = "mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

// 🔌 Connect to MongoDB
mongoose.connect(mongoURI, {
  useNewUrlParser: true,
  useUnifiedTopology: true
})
.then(() => console.log('✅ Connected to MongoDB'))
.catch(err => console.error('❌ MongoDB connection error:', err));

// 📄 Define what a “tribute” looks like
const TributeSchema = new mongoose.Schema({
  mentee: String,
  mentor: String,
  location: String,
  date: { type: Date, default: Date.now }
});

const Tribute = mongoose.model('Tribute', TributeSchema);

// 📥 Get all tributes
app.get('/tributes', async (req, res) => {
  try {
    const tributes = await Tribute.find().sort({ date: -1 });
    res.json(tributes);
  } catch (err) {
    res.status(500).json({ error: 'Failed to fetch tributes' });
  }
});

// 📤 Add a new tribute
app.post('/tributes', async (req, res) => {
  try {
    const tribute = new Tribute(req.body);
    await tribute.save();
    res.json(tribute);
  } catch (err) {
    res.status(500).json({ error: 'Failed to save tribute' });
  }
});

// 🚀 Start the server
const PORT = 4000;
app.listen(PORT, () => console.log(`🚀 Server running on port ${PORT}`));

🔁 Reminder:

Replace this line:

js
Copy code
const mongoURI = "mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

With the actual connection string you got from MongoDB Atlas when you chose:

Connect > Drivers > Node.js

✅ It should start with mongodb+srv:// and include your cluster name and username.

Once you've done that, run:

bash
Copy code
node server.js

And you should see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Let me know when you’re ready to connect the frontend to this server!

Thanks for sharing that — you're running into something different than expected. Let me explain what's going on:

🚨 What's Happening

You're accidentally running Python, not your Node.js backend (server.js).

The output you're seeing:

python-repl
Copy code
Python 3.13.7 ...
>>> 

👆 This is Python’s interactive console — not what we want.

✅ What You Should See When Running Node

When you correctly run your backend with Node.js, you should see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

💡 Let's Fix It

Here’s what to do — step-by-step:

✅ 1. Exit the Python Console

When you see this:

python-repl
Copy code
>>>

Type this to exit Python:

python
Copy code
exit()

or press Ctrl + Z and hit Enter

✅ 2. Go to Your Project Folder

Make sure you're in the folder where your server.js file is:

bash
Copy code
cd C:\Users\chazm\mentor-tribute-backend

If you're already in the node_modules folder, you're too deep. Go up one level by typing:

bash
Copy code
cd ..

until you're in the mentor-tribute-backend folder (where server.js is).

✅ 3. Run Your Backend with Node.js

Now run this:

bash
Copy code
node server.js

(⚠️ not python server.js, and not in the node_modules folder)

📌 What You Should See

If your MongoDB connection is correct, you'll see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

If you get an error, send me the message and I’ll help fix it.

Ready to try running it the correct way? I’ll wait here if you get stuck.

Thanks for the update — and good job getting Node.js set up! You're very close 🎯

❌ The Error Explained:

javascript
Copy code
Error: Cannot find module 'C:\Users\chazm\server.js'

This means you're trying to run server.js from the wrong folder (C:\Users\chazm), but the file is actually inside:

makefile
Copy code
C:\Users\chazm\mentor-tribute-backend\

So Node is saying: “I can’t find server.js here.”

✅ Let's Fix It — Step-by-Step

1. Go to the Correct Folder:

In your terminal, run:

bash
Copy code
cd mentor-tribute-backend

This puts you in the folder that contains your server.js file.

You can double-check you’re in the right place by listing the files:

bash
Copy code
dir

You should see something like:

pgsql
Copy code
server.js  package.json  node_modules

2. Run the Server:

Now run:

bash
Copy code
node server.js

🎉 This should launch the backend. If everything is correct, you'll see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

💡 Summary

Let me know what output you get after running it again from the right folder — I’ll help from there!

Thanks for the detailed update — this is super helpful.

🚨 What the Terminal Is Telling Us:

You are in the correct folder:

makefile
Copy code
C:\Users\chazm\mentor-tribute-backend

But the error:

javascript
Copy code
Error: Cannot find module 'C:\Users\chazm\mentor-tribute-backend\server.js'

...means there is no server.js file in this folder yet.

✅ What To Do Next: Create server.js

Let’s fix that by creating the file and putting in your backend code.

Option 1: Use Visual Studio Code (Recommended)

🪟 If You Have VS Code:

1. Open VS Code

2. Click File > Open Folder

3. Select:

   makefile
   Copy code
   C:\Users\chazm\mentor-tribute-backend
   

4. Click the new file icon (📄 with a plus) in the top left file explorer panel.

5. Name the new file:

   pgsql
   Copy code
   server.js
   

6. Paste the full backend code (I'll repost it below 👇)

Option 2: Use Command Prompt to Create the File

From the terminal, run:

bash
Copy code
notepad server.js

If it asks if you want to create the file, click Yes.

Then paste in the code below and save it.

📄 Paste This Code into server.js

js
Copy code
const express = require('express');
const mongoose = require('mongoose');
const cors = require('cors');

const app = express();
app.use(cors());
app.use(express.json());

// ✅ Replace this with your real MongoDB URI
const mongoURI = "mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

// 🔌 Connect to MongoDB
mongoose.connect(mongoURI, {
  useNewUrlParser: true,
  useUnifiedTopology: true
})
.then(() => console.log('✅ Connected to MongoDB'))
.catch(err => console.error('❌ MongoDB connection error:', err));

// 📄 Schema for tribute entries
const TributeSchema = new mongoose.Schema({
  mentee: String,
  mentor: String,
  location: String,
  date: { type: Date, default: Date.now }
});

const Tribute = mongoose.model('Tribute', TributeSchema);

// 📥 Get all tributes
app.get('/tributes', async (req, res) => {
  try {
    const tributes = await Tribute.find().sort({ date: -1 });
    res.json(tributes);
  } catch (err) {
    res.status(500).json({ error: 'Failed to fetch tributes' });
  }
});

// 📤 Add a new tribute
app.post('/tributes', async (req, res) => {
  try {
    const tribute = new Tribute(req.body);
    await tribute.save();
    res.json(tribute);
  } catch (err) {
    res.status(500).json({ error: 'Failed to save tribute' });
  }
});

// 🚀 Start the server
const PORT = 4000;
app.listen(PORT, () => console.log(`🚀 Server running on port ${PORT}`));

✅ Now Try Again

In your terminal:

bash
Copy code
node server.js

If it works, you’ll see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Let me know how it goes — I’m right here to help with the next step.

Great progress! That message you're seeing is:

csharp
Copy code
[MONGODB DRIVER] Warning: useNewUrlParser is a deprecated option...

✅ What It Means:

• The MongoDB team updated their Node.js driver

• The option useNewUrlParser: true is no longer needed (and will soon be removed)

• It’s just a warning, not an error — your server is probably still running fine ✅

🛠️ How to Fix It (Cleanup)

To remove the warning, just delete that option from your MongoDB connection code.

🔁 Update This Block:

❌ Old (with deprecated options):

js
Copy code
mongoose.connect(mongoURI, {
  useNewUrlParser: true,
  useUnifiedTopology: true
})

✅ New (clean version):

js
Copy code
mongoose.connect(mongoURI)

That's it! The rest of your code stays the same.

✅ After Fixing:

Now re-run your server:

bash
Copy code
node server.js

You should see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

— and no warnings 🎉

Would you like to test your backend by connecting it to your HTML form next?

Great question — and you're thinking like a developer now!

✅ Short Answer:

No, you don’t have to go back to Windows CMD every time — as long as you already have a terminal open in the correct folder, you can use that same terminal to stop and restart your server.

🔁 How to Rerun Your Server (3 Options)

✅ Option 1: You're Already in the Folder

If you're still in this folder:

bash
Copy code
C:\Users\chazm\mentor-tribute-backend

Just re-run:

bash
Copy code
node server.js

Done ✅

🚦 Option 2: If the Server is Still Running

If your server is still running and you want to stop and restart it:

1. Press Ctrl + C in the terminal → This stops the server

2. Then type:

bash
Copy code
node server.js

to start it again

📁 Option 3: If You Closed Everything

If you’ve closed your terminal or restarted your computer:

1. Open Command Prompt (cmd) or Windows Terminal

2. Navigate to your project folder:

bash
Copy code
cd C:\Users\chazm\mentor-tribute-backend

3. Then run:

bash
Copy code
node server.js

Let me know if you'd like to set it up so your server auto-restarts when you make changes (using a tool called nodemon) — it's great for development!

Yes — based on your question, it sounds like your server is already running in the terminal, or something else is taking up the terminal space, and you're unsure how to restart it.

✅ Here's What To Do:

If you see anything running in the terminal (like logs, or no prompt to type), just do this:

✅ Step 1: Stop the Current Process

In the terminal, press:

mathematica
Copy code
Ctrl + C

• That means: hold the Ctrl key, then press C

• It will stop whatever is running (like your node server.js)

• It may ask: Terminate batch job (Y/N)? — type Y and press Enter

✅ Step 2: Clear the Terminal (Optional)

If you want to clean up the screen, just type:

bash
Copy code
cls

and press Enter — this clears the terminal window.

✅ Step 3: Start the Server Again

Make sure you're in the right folder:

bash
Copy code
cd C:\Users\chazm\mentor-tribute-backend

Then run:

bash
Copy code
node server.js

📌 Recap:

Let me know what you see after restarting — I’ll help confirm it’s working or guide you to the next step!

Perfect — your server.js code looks great! ✅

It’s clean, correct, and ready to run.

✅ Next Steps

Now that your backend server is ready:

▶️ Run the server from the terminal:

If you're in the mentor-tribute-backend folder, just type:

bash
Copy code
node server.js

You should see this:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

If you see that — congrats! Your backend is now live and waiting for your frontend to connect 🎉

⏭️ Want to Connect Your Web Form?

Now you can:

• Update your HTML form to send data to http://localhost:4000/tributes

• Fetch and display existing submissions from the same URL

Would you like me to update your HTML code to:

• Submit data to your backend using JavaScript fetch()?

• Retrieve and display existing mentee/mentor tributes from the database?

Let me know — ready when you are!

Thanks for the update! You're really close — and this is an easy fix. You're just in the wrong folder again.

🚨 What’s Wrong?

You're currently inside the node_modules folder:

makefile
Copy code
C:\Users\chazm\mentor-tribute-backend\node_modules>

But your server.js file is one folder up, in:

makefile
Copy code
C:\Users\chazm\mentor-tribute-backend

So when you run:

bash
Copy code
node server.js

it looks for the file inside node_modules (which is wrong), and that’s why it says:

❌ Cannot find module '...node_modules\server.js'

✅ How to Fix It

Just go up one folder first, then run the server.

Step-by-step:

1. In the terminal, type:

bash
Copy code
cd ..

This moves you up to the mentor-tribute-backend folder.

2. Now run:

bash
Copy code
node server.js

✅ What You Should See If It Works:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Would you like me to help connect your webpage form to this backend next? You're ready for it.

Nice — go ahead and run this command:

bash
Copy code
node server.js

✅ But only after you've moved into the correct folder, which is:

makefile
Copy code
C:\Users\chazm\mentor-tribute-backend

If you're still in:

makefile
Copy code
C:\Users\chazm\mentor-tribute-backend\node_modules

👉 You need to move up one level first by typing:

bash
Copy code
cd ..

Then run:

bash
Copy code
node server.js

💡 Here's the full command sequence if you're still inside node_modules:

bash
Copy code
cd ..
node server.js

Let me know what output you see after that — if it says:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

then you are officially live and ready to connect your frontend 🎉

Thanks for the update — you’re so close now! ✅

That error is happening because your MongoDB connection string is still using a placeholder and not the real connection info.

❌ The Problem

Your code currently has:

js
Copy code
const mongoURI = "mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

The part that says:

Copy code
cluster0.abcd123.mongodb.net

❗ This is a fake cluster address (I used it as an example). Your real MongoDB Atlas cluster has its own unique hostname — and that's what you need to use.

✅ How to Fix It

🔍 Step 1: Go to MongoDB Atlas

1. Sign in to your account

2. Click on your project (like MentorTribute)

3. Click on your cluster (likely called Cluster0)

🔌 Step 2: Get Your Real Connection String

1. Click the “Connect” button

2. Choose "Connect your application"

3. Choose Node.js driver

4. You’ll see a string like this:

ruby
Copy code
mongodb+srv://mentoruser:<password>@cluster0.xxxxx.mongodb.net/?retryWrites=true&w=majority

⚠️ Replace <password> with your actual password (e.g., mentorpass123)
And add your database name: mentorDB

✅ Final connection string format:

js
Copy code
const mongoURI = "mongodb+srv://mentoruser:mentorpass123@cluster0.xxxxx.mongodb.net/mentorDB?retryWrites=true&w=majority";

Just replace the part:

Copy code
cluster0.xxxxx.mongodb.net

with the actual value from your Atlas dashboard.

✍️ Step 3: Paste It in Your server.js

Update this line:

js
Copy code
const mongoURI = "mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

To use your correct connection string

▶️ Step 4: Run the Server Again

bash
Copy code
node server.js

✅ You should now see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

If you need help finding your exact connection string in MongoDB Atlas, I can walk you through it — just say the word.

Perfect — you're in the MongoDB Atlas dashboard, under Charles's Org, and you see:

nginx
Copy code
Project 0 — 1 Cluster

✅ That means your MongoDB setup is underway, and we just need to grab the actual connection string from your cluster.

✅ Here's What to Do Next

Follow these exact steps to get your real connection string:

🔹 Step 1: Click into "Project 0"

• This opens the project where your cluster is running

🔹 Step 2: Click on the Cluster Name

You’ll likely see something like:

nginx
Copy code
Cluster0

Click on it to go to your cluster dashboard.

🔹 Step 3: Click the “Connect” Button

You'll see a green Connect button near the top right — click it.

🔹 Step 4: Choose “Connect your application”

• When it asks how to connect, choose:

  • Driver: Node.js

  • Version: Leave the default (e.g., 4.0 or later)

Click Next or Copy.

🔹 Step 5: Copy the Connection String

You’ll get something like this:

ruby
Copy code
mongodb+srv://mentoruser:<password>@cluster0.xxxxx.mongodb.net/?retryWrites=true&w=majority

✅ Final Step: Edit It

1. Replace <password> with your actual password (the one you created for the DB user)

2. Add your database name (mentorDB) after .net/

So it looks like:

bash
Copy code
mongodb+srv://mentoruser:mentorpass123@cluster0.xxxxx.mongodb.net/mentorDB?retryWrites=true&w=majority

⏭️ Then:

1. Paste that string into your server.js file like this:

js
Copy code
const mongoURI = "mongodb+srv://mentoruser:mentorpass123@cluster0.xxxxx.mongodb.net/mentorDB?retryWrites=true&w=majority";

2. Save the file

3. Re-run your server:

bash
Copy code
node server.js

Let me know if you want to paste your copied connection string here (without the password), and I’ll help you finish formatting it.

Thanks for sharing the full output — you're right where you need to be! 💯

Now let’s plug that MongoDB connection into your server.js using Mongoose, since that’s what your backend uses.

✅ Step-by-Step Fix

🔹 You copied this string:

js
Copy code
const uri = "mongodb+srv://chazmratlas:<db_password>@cluster0.zkgclrz.mongodb.net/?retryWrites=true&w=majority&appName=Cluster0";

🔁 You need to:

1. Replace <db_password> with your actual password

2. Add your database name (mentorDB) after .net/

3. Use this in your existing Mongoose connection

✅ Final Example

If your password is: mySecurePass123, your final connection string becomes:

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:mySecurePass123@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

🔒 Use your actual password in place of mySecurePass123

🔁 Update your server.js to use it:

Replace this line:

js
Copy code
const mongoURI = "mongodb+srv://mentoruser:mentorpass123@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

With:

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:YOUR_PASSWORD@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

(Replace YOUR_PASSWORD with your real password.)

▶️ Then Restart the Server

1. Save the file

2. Back in the terminal (in mentor-tribute-backend), run:

bash
Copy code
node server.js

✅ If all goes well, you should see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Want me to help test the backend using your HTML page next? You're ready!

Unfortunately, I don’t have access to your MongoDB Atlas account or credentials, so I can’t see or retrieve your password for you — but here’s how you can reset it or find it:

🔑 How to Reset or Set Your MongoDB Atlas Database Password

✅ Step 1: Go to MongoDB Atlas

• https://cloud.mongodb.com

✅ Step 2: Select Your Project (e.g., “Project 0”)

✅ Step 3: Go to Database Access

• From the left-hand menu, click “Database Access”

✅ Step 4: Check for a Database User

You’ll see a user like:

makefile
Copy code
Username: chazmratlas

If you remember the password you created when setting this up — use that.

🔁 If You Don’t Remember:

Click the “Edit” (pencil icon) next to the user and:

1. Set a new password

2. Click Update User

Then you can use the new password in your connection string.

📌 Example

If you reset the password to:

nginx
Copy code
myNewMongoPass2025

Your connection string becomes:

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:myNewMongoPass2025@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

Let me know when you have your password, and I’ll help you test the connection again.

Thanks for sharing that info — you’re in the MongoDB Atlas organization settings, which is not where you manage your database users or passwords.

To find or reset your MongoDB database password, you need to go to the Database Access section inside your project.

Let’s walk you straight there:

✅ How to Reset or View Your MongoDB Atlas Database Password

🔹 Step 1: Go to Your Project

• From the Atlas dashboard, find your Project 0

• Click on it to open it

🔹 Step 2: Open the “Database Access” Page

On the left-hand menu, under “Security”, click:

pgsql
Copy code
Database Access

This is where you'll see your database user(s). It may look like this:

🔹 Step 3: Reset the Password

1. Click the pencil/edit icon next to the user chazmratlas

2. Enter a new password

3. Save the changes

💬 Choose a password you’ll remember (e.g. MongoPass2025!, or write it down)

🔹 Step 4: Update Your server.js

Replace this line:

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:<db_password>@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

With your real password like this:

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:MongoPass2025!@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

✅ Save the file

🔹 Step 5: Run the Server

In the terminal:

bash
Copy code
node server.js

You should now see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Let me know once you’ve updated the password — I’ll help you test the connection and start hooking up your HTML form next!

You're doing great — and you're almost there. 🎯
The issue you're hitting is very simple:

👉 Your server.js file does not exist in the folder.

🛠️ What's Going On

You're in the right folder:

makefile
Copy code
C:\Users\chazm\mentor-tribute-backend>

But when you run:

bash
Copy code
node server.js

You get:

javascript
Copy code
Error: Cannot find module 'C:\Users\chazm\mentor-tribute-backend\server.js'

And when you ran dir, there was no server.js file listed, only:

• package.json

• package-lock.json

• node_modules/

✅ Here's What To Do Now

Let’s create your missing server.js file and paste your working code into it.

✅ Step-by-Step Instructions

📄 Step 1: Open Command Prompt & Create the File

You're already in the right folder, so run:

bash
Copy code
notepad server.js

This will open Notepad and ask if you want to create the file. Click Yes.

🧠 Step 2: Paste This Full Code

In the blank Notepad file that opens, paste the following:

js
Copy code
const express = require('express');
const mongoose = require('mongoose');
const cors = require('cors');

const app = express();
app.use(cors());
app.use(express.json());

const mongoURI = "mongodb+srv://chazmratlas:YOUR_PASSWORD@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

mongoose.connect(mongoURI)
.then(() => console.log('✅ Connected to MongoDB'))
.catch(err => console.error('❌ MongoDB connection error:', err));

const TributeSchema = new mongoose.Schema({
  mentee: String,
  mentor: String,
  location: String,
  date: { type: Date, default: Date.now }
});

const Tribute = mongoose.model('Tribute', TributeSchema);

app.get('/tributes', async (req, res) => {
  try {
    const tributes = await Tribute.find().sort({ date: -1 });
    res.json(tributes);
  } catch (err) {
    res.status(500).json({ error: 'Failed to fetch tributes' });
  }
});

app.post('/tributes', async (req, res) => {
  try {
    const tribute = new Tribute(req.body);
    await tribute.save();
    res.json(tribute);
  } catch (err) {
    res.status(500).json({ error: 'Failed to save tribute' });
  }
});

const PORT = 4000;
app.listen(PORT, () => console.log(`🚀 Server running on port ${PORT}`));

🔒 IMPORTANT: Replace YOUR_PASSWORD with the actual password you set for your MongoDB user.

💾 Step 3: Save and Close

• Click File > Save

• Close Notepad

▶️ Step 4: Run Your Server Again

Now go back to your terminal and run:

bash
Copy code
node server.js

You should now see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Let me know what it shows after that — and we’ll move on to linking your HTML form to this backend!

You're literally one letter away from success. 😄

🔧 The Issue

You typed:

nginx
Copy code
node serer.js

But the file is named:

pgsql
Copy code
server.js

☝️ You just missed a v in the word server.

✅ The Fix

Run this instead:

bash
Copy code
node server.js

That’s it!

🟢 If Everything Works

You’ll see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Which means your backend server is now fully online and connected to your cloud database.

Let me know when that works, and I’ll help you:

• Connect your HTML form to this backend

• Start saving real tribute entries to the database 💾

YES — your server is running! 🟢
BUT — your MongoDB connection is still using the old fake URL:

Copy code
cluster0.abcd123.mongodb.net

That abcd123 is just an example — it's not real. That's why you're seeing this error:

❌ MongoDB connection error: querySrv ENOTFOUND _mongodb._tcp.cluster0.abcd123.mongodb.net

✅ What You Need To Do

Let’s plug in your real MongoDB cluster address (you found this earlier from MongoDB Atlas).

You told me earlier that your actual cluster string looked like:

bash
Copy code
mongodb+srv://chazmratlas:<your-password>@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0

🛠 You must replace the fake URI in your server.js with this one.

🔁 Step-by-Step Fix

✏️ Open server.js

1. Open your server.js file (in Notepad or VS Code)

2. Find the line that says:

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:YOUR_PASSWORD@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

3. Replace it with this (with your real password):

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:your_real_password@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

🔒 Replace your_real_password with the password you set earlier when resetting your MongoDB user password.

💾 Save the File

• Click File > Save

• Close the editor

▶️ Run the Server Again

Back in the terminal:

bash
Copy code
node server.js

✅ Expected Result:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Once you see that, you're fully connected to MongoDB and we can move on to hooking up your HTML form to send and retrieve tribute submissions from the database.

Ready?

You're still connecting to the wrong cluster address — cluster0.abcd123.mongodb.net — which is just a placeholder and not your real MongoDB URI.

✅ Let's Fix It For Real

You need to update this line in your server.js file:

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:your_password@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

To use your actual Atlas cluster address, which you showed earlier as:

bash
Copy code
cluster0.zkgclrz.mongodb.net

✏️ Step-by-Step

1. Open server.js

Run:

bash
Copy code
notepad server.js

(or open it in VS Code if you're using that)

2. Find This Line:

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:your_password@cluster0.abcd123.mongodb.net/mentorDB?retryWrites=true&w=majority";

3. Replace It With This (using your real cluster):

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:YOUR_ACTUAL_PASSWORD@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

🔒 Replace YOUR_ACTUAL_PASSWORD with the real password you set when editing your user in MongoDB Atlas.

✅ Example (if your password is MongoPass2025!):

js
Copy code
const mongoURI = "mongodb+srv://chazmratlas:MongoPass2025!@cluster0.zkgclrz.mongodb.net/mentorDB?retryWrites=true&w=majority&appName=Cluster0";

4. Save the File

Click File > Save, then close Notepad.

5. Restart the Server

In the terminal, run:

bash
Copy code
node server.js

✅ If It Works:

You’ll see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

If you still get an error, feel free to paste your current mongoURI line (without the password) and I’ll help double-check it.

Great — sounds like you've updated server.js correctly. Now you just want to:

✅ Return to the terminal prompt so you can run your server again.

If You're Still in Notepad or VS Code:

Just save the file and close the editor window:

• In Notepad:

  • Click File > Save

  • Then click the X in the top right to close it

• In VS Code:

  • Press Ctrl + S to save

  • Then switch back to your terminal window (no need to close VS Code)

If You're in the Terminal But the Prompt Is Missing

If you're still in a running program or the terminal seems stuck, press:

txt
Copy code
Ctrl + C

That cancels any running command and returns you to the prompt:

makefile
Copy code
C:\Users\chazm\mentor-tribute-backend>

✅ Once You're Back at the Prompt

You can now run the server again:

bash
Copy code
node server.js

You should now see:

pgsql
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Let me know what output you get — you’re one step away from fully connecting everything!

You're almost there — and this is a simple fix! Here's what went wrong:

🛑 What's the Problem?

You're running:

bash
Copy code
node server.js

But you're in the wrong folder:

mathematica
Copy code
PS C:\Users\chazm\mentor-tribute-backend\node_modules>

There is no server.js inside the node_modules folder — that folder only contains packages.

✅ The Fix (2 easy steps)

1. Go up one level to your project root folder:

   Run this command:

   bash
   Copy code
   cd ..
   

   This moves you to:

   makefile
   Copy code
   C:\Users\chazm\mentor-tribute-backend>
   

2. Now start your server:

   bash
   Copy code
   node server.js
   

✅ What You Should See (if everything is correct)

bash
Copy code
✅ Connected to MongoDB
🚀 Server running on port 4000

Let me know once you see this or if you get a different message — we’ll tackle it instantly.